Wiper Mounting Arm and Pivot Shaft - Rear

Wiper Mounting Arm and Pivot Shaft - Rear

Removal and Installation

1. Remove the rear wiper pivot arm. For additional information, refer to Wiper Pivot Arm - Rear Wiper Pivot Arm - Rear.

2. Remove the dust boot cover.





3. Remove the nut and the rear window glass handle.
- To install, tighten to 18 Nm (159 lb-in).





4. Open the liftgate glass.

5. Remove the nuts and the rear window wiper striker and wiper pivot shaft assembly.
- To install, tighten to 6 Nm (53 lb-in).





6. To install reverse the removal procedure.