Brake Disc Shield

Brake Disc Shield

Removal

1. Remove the wheel hub and bearing. REFER to Wheel Bearing and Wheel Hub - Front Wheel Drive (FWD) Rear Suspension or REFER to Wheel Bearing and Wheel Hub - All Wheel Drive (AWD) Rear Suspension .

2. Remove the 3 bolts and the brake disc shield.

Installation

1. Install the brake disc shield and the 3 bolts.

- Tighten to 15 Nm (133 lb-in).

2. Install the wheel hub and bearing. REFER to Wheel Bearing and Wheel Hub - Front Wheel Drive (FWD) Rear Suspension or REFER to Wheel Bearing and Wheel Hub - All Wheel Drive (AWD) Rear Suspension.