Seat Backrest Latch - Rear, Crew Cab

Seat Backrest Latch - Rear, Crew Cab

Removal and Installation

NOTE: RH shown, LH similar.

NOTE: For parts identification and location, refer to Seat - Exploded View, Rear, Crew Cab Seat - Exploded View, Rear, Crew Cab.

1. NOTE: The seat backrest latch is only accessible when the seat cushion is raised.

Release the backrest latch.

- From behind the backrest, pull up on the latch release and pull the backrest forward.

- Release the cushion latch and lower the cushion and backrest.





2. Remove the 2 bolts and backrest latch.
- To install, tighten to 10 Nm (89 lb-in).

3. To install, reverse the removal procedure.