Wheel Speed Sensor - Front

Wheel Speed Sensor - Front









Removal and Installation

1. Remove the brake disc. For additional information, refer to Front Disc Brake Brake Disc.

2. NOTE: The wheel speed sensor harness electrical connector is located in the engine compartment secured to the fender apron.

Disconnect the wheel speed sensor electrical connector.

3. Detach the 2 wheel speed sensor harness pushpin retainers.

4. Detach the wheel speed sensor harness retainer from the brake hose.

5. Remove the wheel speed sensor harness bolt.
- To install, tighten to 12 Nm (106 lb-in).

6. Remove the wheel speed sensor bolt and the wheel speed sensor.
- To install, tighten to 17 Nm (150 lb-in).

7. To install, reverse the removal procedure.