Seat Cushion - Front, Center

Seat Cushion - Front, Center

Disassembly and Assembly

NOTE: For parts identification and location, refer to Seat - Exploded View, Front, Center Seat - Exploded View, Front, Center.

1. Remove the seat backrest. For additional information, refer to Seat Backrest - Front, Center Seat Backrest - Front, Center.

2. To remove the seat cushion cover, refer to Seat Cushion Cover - Front, Center Seat Cushion Cover - Front, Center.

3. Remove the 2 nuts and backrest latch.
- To install, tighten to 45 Nm (33 lb-ft).

4. Remove the bolt and center safety belt buckle.
- To install, tighten to 45 Nm (33 lb-ft).

5. For regular cab, remove the bolt and detachable safety belt anchor.
- To install, tighten to 45 Nm (33 lb-ft).

6. For SuperCab and Crew Cab, remove the bolt and center safety belt.
- To install, tighten to 45 Nm (33 lb-ft).

7. Remove the storage tray.
- If equipped, remove the 2 pin-type retainers.

- Pull up from the rear edge to release and remove the storage tray.

8. If equipped, remove the 2 screws and front storage tray.

9. If equipped, remove the 2 screws and front cupholder assembly.

10. If equipped, remove the 2 screws and rear cupholder assembly.

11. To assemble, reverse the disassembly procedure.