Throttle Body: Service and Repair

Throttle Body









Removal and Installation

1. Remove the Air Cleaner (ACL) outlet pipe. For additional information, refer to Intake Air Distribution and Filtering [1][2]Diagrams.

2. Disconnect the Throttle Body (TB) electrical connector.

3. Loosen the clamp and disconnect the Charge Air Cooler (CAC) outlet pipe-to-TB.
- To install, tighten to 5 Nm (44 lb-in).

4. Remove the 4 bolts and the TB.
- Discard the TB gasket.

- To install, tighten to 10 Nm (89 lb-in).

5. NOTE: Install a new TB gasket.

To install, reverse the removal procedure.