Electronic Locking Differential (ELD) Field Coil

Electronic Locking Differential (ELD) Field Coil













Removal

1. Remove the differential carrier. For additional information, refer to Differential Carrier Differential Carrier.

2. Using the Bearing Puller plate, Step Plate and a suitable press, remove the LH differential bearing.





3. Remove and discard the 6 screws and 3 stoppers that hold the Electronic Locking Differential (ELD) coil in place and remove the coil.





4. Remove and discard the plunger assembly.





Installation

1. Install a new plunger assembly.





2. Install the new ELD coil, 3 stoppers and 6 screws that hold the coil in place.
- Tighten to 5 Nm (44 lb-in).





3. Use the Differential Carrier Bearing Installer to install the LH differential bearing.





4. Install the differential carrier. For additional information, refer to Differential Carrier Differential Carrier.