Instruments - Unable To Adjust Compass Zone
TSB 11-2-602/07/11
UNABLE TO ADJUST COMPASS ZONE
FORD:
2011 F-150
ISSUE
Some 2011 F-150 vehicles built on or before 12/10/2010 and equipped with a compass in the Center Instrument Display (CID) only, when following the compass zone adjustment procedure in Owner Guide the system may not progress through each zone while pressing and releasing radio preset buttons 7 and 9, and may remain locked in zone 01.
ACTION
Reprogram the Instrument Cluster Module (ICM) to the latest calibration using IDS release 71.02A and higher. This new calibration is not included in the VCM 2011.1 DVD. Calibration files may also be obtained at the website.
NOTE
VEHICLES EQUIPPED WITH NAVIGATION SYSTEM ARE NOT AFFECTED BY THIS CONDITION.
WARRANTY STATUS: Eligible Under Provisions Of New Vehicle Limited Warranty Coverage
IMPORTANT: Warranty coverage limits/policies are not altered by a TSB. Warranty coverage limits are determined by the identified causal part.
OPERATION DESCRIPTION TIME
110206A 2011 F-150: Reprogram 0.3 Hr.
The Instrument Cluster (Do
Not Use With Any Other
Labor Operations)
DEALER CODING
CONDITION
BASIC PART NO. CODE
10849 04
Disclaimer