Braking Sensor/Switch: Service and Repair

Brake Pedal Control Switch

NOTE: Steering wheel removed for clarity.





Item Part Number Description

1 W715057 Screw

2 9G604 Brake pedal control switch

Removal and Installation

NOTE: Turn the steering wheel 90 degrees to the left to access the brake pedal control switch screws.

1. Remove the steering column shrouds. For additional information, refer to Steering column.

. Remove the screw.

- To install, tighten to 3 Nm (27 lb-in).

3. Using a suitable tool (such as a pocket screwdriver), carefully disengage the control switch locking tabs one at a time, then remove the switch.

4. To install, reverse the removal procedure.