Seat Latch - Rear, Crew Cab

Seat Latch - Rear, Crew Cab

Removal and Installation

NOTE: For parts identification and location, refer to Seat - Exploded View, Rear, Crew Cab Seat - Exploded View, Rear, Crew Cab.

1. Remove the seat cushion cover. For additional information, refer to Seat Cushion Cover - Rear, Crew Cab Seat Cushion Cover - Rear, Crew Cab.

2. Remove the 2 screws and latch release handle.
- Release the cable retainer.

- Note cable routing for correct installation.

3. For 60 percent seat, detach the assist spring strut from the outboard riser.





4. Remove the front and rear latch bolts.
- To install, tighten to 32 Nm (24 lb-ft).

5. Remove the cushion pivot bolt, outboard riser and cushion latch.
- To install, tighten to 32 Nm (24 lb-ft).

6. To install, reverse the removal procedure.