Camshaft Gear/Sprocket: Specifications

NOTE: Use a wrench on the flats of the camshaft to hold the camshafts while tightening the VCT assembly bolts.

Install the 3 LH intake VCT assembly bolts and the 3 LH exhaust VCT assembly bolts.

- Tighten to 15 Nm (133 lb-in) plus an additional 90 degrees.





Install the 3 RH intake VCT assembly bolts and the 3 RH exhaust VCT assembly bolts.

- Tighten to 15 Nm (133 lb-in) plus an additional 90 degrees.