Drive Belts, Mounts, Brackets and Accessories: Service and Repair

Cooling Fan Drive Assembly - 6.7L Diesel

Removal and Installation

1. Remove the cooling fan. For additional information, refer to Engine Cooling - Diesel Engine Cooling Fan.

2. Rotate the accessory belt tensioner clockwise and remove the accessory drive belt.

3. Remove the 3 bolts and the cooling fan drive assembly.
- To install, tighten to 24 Nm (18 lb-ft).

4. NOTE: For additional information, refer to Accessory Drive Description and Operation in the Description and Operation information for correct drive belt routing.

To install, reverse the removal procedure.