Oil Pressure Sender

Engine Control Components - Exploded View





Engine Oil Temperature (EOT) Sensor and Engine Oil Pressure (EOP) switch

NOTE: Apply thread sealant to the sensors prior to installation.









Removal and Installation

NOTICE: Do not use silicone based sprays or lubricants on any components installed onto or around the diesel exhaust system or intake air distribution and filtering system. Silicone reacts with the Nitrogen Oxides (NOx) sensor and may cause permanent damage to the NOx sensor.

NOTICE: Make sure the ignition switch is in the OFF position prior to working on the electronic engine controls or damage to the vehicle may occur.

1. Refer to the procedures and/or exploded views for any Warnings, Notices, Notes, Materials, Specifications, and Special Tools. Items in the exploded views may not be listed in order of removal.