Roof Opening Panel Shield

Roof Opening Panel Shield

Removal and Installation

NOTE: The roof opening panel motor must be initialized when repairs are carried out on any part of the roof opening panel, including: whenever the roof opening panel motor has been removed from the roof opening panel assembly, a new roof opening panel motor has been installed or when a new roof opening panel frame has been installed. For additional information, refer to Roof Opening Panel Motor Initialization Programming and Relearning.

1. Remove the trough assembly. For additional information, refer to Trough Assembly Trough Assembly.

2. Slide the roof opening panel shield halfway forward.





3. Disengage the front roof opening panel shield guide feet.

1. Push the roof opening panel shield toward one side of the vehicle.

2. Carefully flex the front portion of the roof opening panel shield upward to disengage the guide feet.





4. Slide the roof opening panel shield forward and release the rear guide feet.





5. To install, reverse the removal procedure.
- Align the roof opening panel. For additional information, refer to Roof Opening Panel Alignment Adjustments.

- Initialize the roof opening panel motor. For additional information, refer to Roof Opening Panel Motor Initialization Programming and Relearning.