75000 MI or 120000 KM

Inspect
    Wheels
      Inspect wheels and related components for abnormal noise, wear, looseness or drag, if not using Special Operating conditions.
    Vehicle
      Perform multi-point inspection (recommended).
    Universal Joint, Drive/Propeller Shaft
      Inspect and Lubricate U-joints and if using Special Operating conditions D and O.
    Tie Rod End
      Inspect and lubricate ball joints and tie rods (if equipped with grease fittings) and if using Special Operating conditions D and O.
    Steering and Suspension
      Inspect and lubricate steering linkage.
    Fluid - A/T
      Inspect automatic transmission fluid level.
    Exhaust System
      Inspect exhaust system and heat shields.
    Cooling System
      Inspect concentration (freeze-point protection) and additive strength (corrosion inhibitor) (add engine coolant additive, if required), if using Special Operating Conditions T, I, D, O, E.
    Brakes and Traction Control
      Inspect brake pads, shoes, rotors, drums, brake linings, hoses, and parking brake, if not using Special Operating conditions or if using Special Operating conditions D and O.
    Ball Joint
      Inspect and lubricate ball joints and tie rods (if equipped with grease fittings) and if using Special Operating conditions D and O.
    Air Cleaner Restriction Indicator
      Inspect air filter restriction gauge (replace air filter as required or when air filter restriction gauge indicates), if using Special Operating conditions D and O. Inspect air filter restriction gauge, replace filter as necessary, if not using Special Operating conditions.
Replace
    Oil Filter, Engine
      Change engine oil if not using special operating conditions and if using Special Operating conditions D and O. Replace oil filter every 5000-7499 miles (8000-11999 km) or 200-299 engine hours, if using Special Operating Conditions T and I.
    Fuel Filter
      Change engine- and frame-mounted fuel filters, if using Special Operating Conditions T, I, D, O, E.
    Engine Oil
      Change engine oil every 2500 miles (4000 km) or 3 months (if using high sulfur fuel with more than 500 ppm sulfur), if use of non-Ultra Low Sulfur Diesel (ULSD) fuel-Vehicles operated where ULSD fuel is not required/not available. Change engine oil if not using special operating conditions and if using Special Operating conditions D and O. Replace engine oil every 5000-7499 miles (8000-11999 km) or 200-299 engine hours, if using Special Operating Conditions T and I.
Rotate
    Tires
      Roate tires, inspect tires for wear and measure tread depth and inspect wheel ends for endplay and noise, if using Special Operating Conditions D and O. Vehicles equipped with dual rear wheels should only rotate if unusual wear is observed. Rotate tires, inspect tire wear and measure tread depth, if not using Special Operating conditions. Vehicles equipped with dual rear wheels should only rotate if unusual wear is observed.