Trailer Brake Control Module: Service and Repair

Trailer Brake Control (TBC) Module









Removal and Installation

1. Remove the instrument panel upper center finish panel. For additional information, refer to Instrument Panel and Console Instrument Panel Finish Panel.

2. NOTICE: The clips holding the coin tray/storage bin or the auxiliary switch assembly (if equipped) to the center finish panel are very stiff. Care must be taken not to damage the coin tray/storage bin, switch assembly or center finish panel during removal.

Press the 4 tabs and remove the coin tray/storage bin or the switch assembly (if equipped).





3. Remove the Trailer Brake Control (TBC) module.

4. To install, reverse the removal procedure.