SuperCab

Seat Cushion - Rear, SuperCab

SuperCab Bench Seat Cushion









Disassembly and Assembly

NOTE: If both seat cushions need to be disassembled, repeat steps for other side.

1. Remove the seat cushion. For additional information, refer to Seat - Rear, SuperCab SuperCab.

2. Remove the 60 percent or 40 percent seat cushion. For additional information, refer to Seat Cushion - Rear, SuperCab SuperCab.

3. Remove the screw and latch handle cover.

4. Remove the support-to-latch bolts.

1. Remove the upper support-to-latch bolt.
- To install, tighten to 33 Nm (24 lb-ft).

2. Remove the lower support-to-latch bolt.
- To install, tighten to 25 Nm (18 lb-ft).

5. Remove the RH latch cover.

6. Remove the latch-to-cushion frame bolt.
- To install, tighten to 33 Nm (24 lb-ft).

7. Release the cushion trim cover J-clip.





8. Invert and remove the cushion trim cover.

9. Remove the cushion foam pad from the cushion frame.

10. To assemble, reverse the disassembly procedure.