Crankshaft Position Sensor

Engine Control Components - Exploded View, 6.8L (3V)









Crankshaft Position (CKP) Sensor

NOTE: The accessory drive belt must be removed to perform this procedure. For additional information, refer to Accessory Drive .

NOTE: The A/C compressor must be positioned aside to access the Crankshaft Position (CKP) sensor, it is not necessary to remove the A/C compressor from the vehicle.

NOTE: Lubricate the CKP sensor O-ring seal with clean engine oil prior to installation.

NOTE: After installing the CKP sensor, use the scan tool to perform the Misfire Monitor Neutral Profile Correction procedure, following the on-screen instructions.









Removal and Installation

1. Refer to the procedures and/or exploded views for any Warnings, Notices, Notes, Materials, Specifications, and Special Tools. Items in the exploded views may not be listed in order of removal.