Toe Adjustment

Toe Adjustment - F-250 and F-350 Four Wheel Drive (4WD), F-450, F-550

1. Using alignment equipment and the manufacturer's instructions, measure the toe settings.
- Refer to Alignment Specifications in the Specifications information for optimal alignment settings.

- If the toe settings are not within specification, go to the next step.

2. Start the engine and center the steering wheel.

3. Turn the engine off and, using a suitable steering wheel holding device, lock the steering wheel in the straight ahead position.

4. Loosen the tie-rod adjuster sleeve nuts.





5. Rotate the center link to the correct toe setting.

6. Make sure that the RH tie-rod end is not misaligned, as shown in image 2. Adjust the position as necessary as shown in image 1.





7. Tighten the tie-rod adjuster sleeve nuts to 55 Nm (41 lb-ft).

8. Verify the toe settings and adjust as necessary.