Malfunction Indicator Lamp: Description and Operation

MALFUNCTION INDICATOR LAMP (MIL)

The MIL informs the driver the powertrain control module (PCM) has detected an on-board diagnostic (OBD) emission-related component or system concern.
- The MIL is located in the instrument panel cluster.
- The indicator is illuminated by a PCM message sent through the controller area network (CAN) to the instrument panel cluster.
- An engine or transmission with federal calibration operating in the failure mode effects management (FMEM) may cause the MIL to illuminate.
- To turn off the MIL after a repair, a clear DTCs command from the scan tool must be sent to the PCM.
- For any MIL concern, Refer to Symptom Charts, GO to Quick Test QT1, Powertrain Control Module (PCM) Quick Test. QT : Powertrain Control Module (PCM) Quick Test