Pinpoint Test S: Exterior Door Release Handle Sticks

Handles, Locks, Latches and Entry Systems

Pinpoint Test S: Exterior Door Release Handle Sticks

Normal Operation

The exterior door handle is connected to the door latch with an actuating cable. When the exterior door handle is pulled it causes the cable to pull on the latch lever. When the latch lever is moved, the door latch releases, allowing the door to open. The handle has a return spring to make sure the handle returns to a closed position.

This pinpoint test is intended to diagnose the following:

- Binding cable
- Broken handle return spring
- Door latch

PINPOINT TEST S: EXTERIOR DOOR RELEASE HANDLE STICKS

-------------------------------------------------
S1 CHECK THE EXTERIOR DOOR HANDLE AND LINKAGE OPERATION

- Disconnect the exterior door handle actuating cable from the door latch.
- Operate the exterior door handle while observing the linkage.
- Are any of the exterior door handle components or linkages binding?

Yes
GO to S2.

No
INSTALL a new door latch. REFER to Front Door Latch Front Door Latch or Rear Door Latch Rear Door Latch. TEST the system for normal operation.

-------------------------------------------------
S2 CHECK FOR A BROKEN RETURN SPRING

- Disconnect the exterior door handle actuating cable from the exterior door handle reinforcement.
- Pull and release the exterior door handle
- Does the exterior door handle return to a closed position once released?

Yes
INSTALL a new exterior door handle cable. TEST the system for normal operation.

No
INSTALL a new exterior door handle reinforcement. REFER to Door Handle Reinforcement - Exterior, Front Door Handle Reinforcement - Exterior, Front or Door Handle Reinforcement - Exterior, Rear Door Handle Reinforcement - Exterior, Rear. TEST the system for normal operation.

-------------------------------------------------