Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2011 >> Fiesta L4-1.6L >> Repair and Diagnosis >> Brakes and Traction Control >> Antilock Brakes / Traction Control Systems >> Wheel Speed Sensor >> Service and Repair >> Wheel Speed Sensor - Front
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Wheel Speed Sensor - Front




Wheel Speed Sensor - Front

NOTE: LH shown, RH similar.









Removal and Installation

1. Remove the wheel and tire. For additional information, refer to Wheels and Tires Removal and Replacement.

2. Position the rear portion of the splash shield aside.

1. Remove the 3 pushpin retainers.

2. Position the splash shield aside.





3. Disconnect the wheel speed sensor electrical connector.

4. Detach the wheel speed sensor from the body and wheel knuckle.

5. Remove the wheel speed sensor bolt.
- To install, tighten to 9 Nm (80 lb-in).

6. Remove the wheel speed sensor.

7. NOTICE: The white stripe on the wheel speed sensor harness is used for orientation purposes. Correct routing of the wheel speed sensor and harness is essential to prevent contact damage to the harness.

To install, reverse the removal procedure.





pro multis · About Operation CHARM