Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la
If it fails: lemon-manuals.org.ua

Or, hide this message: temporarily or permanently

Headlamp: Service and Repair




Headlamp Assembly

NOTE: RH shown, LH similar.









Removal and Installation

1. Remove the headlamp assembly-to-upper radiator grille reinforcement pin-type retainer.

2. Remove the 3 headlamp assembly bolts.
- To install, tighten to 5 Nm (44 lb-in).

3. Gently lift up on the headlamp assembly to disconnect assembly from the lower clip.

4. Disconnect the headlamp assembly electrical connectors and disengage the wiring assembly clips from the headlamp assembly.

5. NOTE: The headlamp assembly has a lip that must fit under the front bumper assembly to insure proper fit.

Remove the headlamp assembly.





6. To install, reverse the removal procedure.
- If necessary, adjust the headlamps. For additional information, refer to Headlamp Adjustment Adjustments.