Rear Suspension
Install the wheel bearing and wheel hub assembly with 4 new bolts in the sequence shown.
1. Tighten all 4 bolts to 65 Nm (48 lb-ft).
2. Loosen each bolt 90 degrees.
3. Tighten each bolt to 65 Nm (48 lb-ft) using the sequence shown.
Install the wheel bearing and wheel hub assembly with 4 new bolts in the sequence shown.
1. Tighten all 4 bolts to 65 Nm (48 lb-ft).
2. Loosen each bolt 90 degrees.
3. Tighten each bolt to 65 Nm (48 lb-ft) using the sequence shown.