Removal and Replacement

Transaxle Vent









Removal

1. Remove the battery and battery tray. For additional Information, refer to Battery, Mounting and Cables Battery And Battery Tray - Exploded View.

2. Remove the Air Cleaner (ACL) assembly and the outlet pipe. For additional Information, refer to Intake Air Distribution and Filtering [1][2]Diagrams.

3. Remove the vent assembly end from the cooling fan housing and position it aside.





4. Remove the vent assembly from the transaxle.





Installation

1. Inspect the vent transaxle bore for damage or debris. Clean or repair as needed.

2. Install the vent assembly in the transaxle bore.





3. NOTICE: Make sure the transaxle vent hose is properly routed or damage can occur.

Install the vent assembly end onto the cooling fan housing.





4. Install the ACL assembly and outlet pipe. For additional Information, refer to Intake Air Distribution and Filtering [1][2]Diagrams.

5. Install the battery tray and battery. For additional Information, refer to Battery, Mounting and Cables Battery And Battery Tray - Exploded View.