Transmission Range (TR) Sensor

Transmission Range (TR) Sensor





Removal

1. Disconnect the Transmission Range (TR) sensor electrical connector.





2. Remove the 2 TR sensor bolts and the TR sensor.





Installation

1. Install the TR sensor and the 2 TR sensor bolts.
- Tighten to 10 Nm (89 lb-in).





2. Connect the TR sensor electrical connector.





3. Adjust the selector lever cable. For additional information, refer to Automatic Transaxle/Transmission External Controls Adjustments.

4. Re-calibrate the TR sensor. For additional information, refer to Transmission Adaptive Learning Transmission Adaptive Learning.

5. Verify the vehicle starts in PARK and NEUTRAL only.