Pinpoint Test F: Hard Shifting

Manual Transaxle and Clutch

Pinpoint Tests

PINPOINT TEST F: HARD SHIFTING

-------------------------------------------------
F1 CHECK THE FLUID LEVEL

NOTE: The hydraulic clutch fluid is supplied from the brake master cylinder.

- Ignition OFF.
- Inspect the fluid level in the brake master cylinder reservoir.
- Is the fluid within the MAX and MIN level marks?

Yes
GO to F2.

No
ADD brake fluid and CHECK for leaks in the clutch and brake system. TEST the system for normal operation.

-------------------------------------------------
F2 CHECK THE CLUTCH PEDAL FREE PLAY

- Press the clutch pedal lightly by hand.
- Measure the distance the clutch pedal travels.
- Is the clutch pedal free play within 1-3 mm (0.04-0.12 in)?

Yes
DIAGNOSE hard shifting concern. REFER to Manual Transaxle/Transmission Testing and Inspection.

No
INSPECT the clutch pressure plate for wear or damage. REPAIR as necessary. REFER to Clutch Service and Repair. TEST the system for normal operation.

-------------------------------------------------