Pinpoint Test J: An Individual Button/Feature Is Inoperative From The Remote Keyless Entry (RKE) Transmitter

Handles, Locks, Latches and Entry Systems

Pinpoint Tests

Pinpoint Test J: An Individual Button/Feature Is Inoperative From The Remote Keyless Entry (RKE) Transmitter

Normal Operation

When any Remote Keyless Entry (RKE) Integrated Keyhead Transmitter (IKT) button is pressed, the Smart Junction Box (SJB) receives and processes the command to provide the appropriate output.

This pinpoint test is intended to diagnose the following:

- Door locks
- Horn system
- Liftgate release
- Turn signal system
- IKT


PINPOINT TEST J: AN INDIVIDUAL BUTTON/FEATURE IS INOPERATIVE FROM THE RKE TRANSMITTER

NOTE: The panic feature only operates when the key is in the OFF position.

-------------------------------------------------
J1 VERIFY THE DOOR LOCK OPERATION


- Press the lock and unlock button from the driver door lock control switch while observing the door lock operation.
- Do the door locks operate correctly?

Yes
GO to J2.

No
GO to Symptom Chart - Electrical. Symptom Related Diagnostic Procedures

-------------------------------------------------
J2 VERIFY THE HORN OPERATION


- Enter the following diagnostic mode on the scan tool: SJB DataLogger .
- Select the SJB PID (HORN) and active command the horn on.
- Does the horn sound when commanded on?

Yes
GO to J3.

No
REFER to Horn Testing and Inspection.

-------------------------------------------------
J3 VERIFY THE HAZARD LAMP OPERATION


- Place the hazard switch in the ON position.
- Do the hazard lamps operate correctly?

Yes
GO to J4.

No
REFER to Exterior Lighting Testing and Inspection.

-------------------------------------------------
J4 VERIFY THE LIFTGATE LATCH OPERATION


- NOTE: The doors must be unlocked before verifying the liftgate release operation.

- Press the liftgate (located on the liftgate trim panel) release button.
- Does the liftgate release?

Yes
REPLACE the inoperative IKT. PROGRAM the new IKT. REFER to Anti-Theft - Passive Anti-Theft System (PATS) Key Programming. TEST the system for normal operation.

No
GO to Pinpoint Test F. Pinpoint Test F: The Liftgate Latch Release Is Inoperative/Does Not Operate Correctly

-------------------------------------------------