Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2011 >> Flex AWD V6-3.5L >> Repair and Diagnosis >> Brakes and Traction Control >> Antilock Brakes / Traction Control Systems >> Wheel Speed Sensor >> Service and Repair >> Wheel Speed Sensor - Rear
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Wheel Speed Sensor - Rear




Wheel Speed Sensor - Rear

NOTE: LH side shown, RH side similar.











Removal and Installation

1. NOTICE: Make sure to correctly route and secure the wheel speed sensor harness in the rear subframe assembly or damage to the harness may occur.

With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Jacking and Lifting Service and Repair.

2. Disconnect the wheel speed sensor electrical connector.

3. Detach the 2 wheel speed sensor pin-type retainers.

4. Detach the 2 wheel speed sensor harness retainers.

5. Remove the wheel speed sensor bolt.
- To install, tighten to 15 Nm (133 lb-in).

6. Remove the wheel speed sensor.

7. To install, reverse the removal procedure.
pro multis · About Operation CHARM