Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2011 >> Flex AWD V6-3.5L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Sensors and Switches - Computers and Control Systems >> Knock Sensor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Knock Sensor: Service and Repair




Knock Sensor (KS) - 3.5L





NOTE: LH cylinder head removed from art for clarity.











Removal and Installation

1. Remove the thermostat housing. For additional information, refer to Engine Cooling Service and Repair.

2. Remove the lower intake manifold. For additional information, refer to Engine - 3.5L Service and Repair.

3. Remove the coolant tube.
- Discard the O-ring seal.

4. Disconnect the Knock Sensor (KS) electrical connector.

5. Remove the 2 bolts and the KS.
- To install, tighten to 20 Nm (177 lb-in).

6. To install, reverse the removal procedure.
- Lubricate the new O-ring seal with clean engine coolant.

pro multis · About Operation CHARM