Battery Tray

Battery Tray

Removal and Installation

1. Remove the battery. For additional information, refer to Battery Battery.

2. Remove the Air Cleaner (ACL) assembly. For additional information, refer to Intake Air Distribution and Filtering Air Cleaner.

3. Disconnect the wiring harness fastener from the battery tray.

4. Remove the 3 bolts and 1 nut from the battery tray.
- To install, tighten to 15 Nm (133 lb-in).

5. Disconnect the Battery Junction Box (BJB) fastener and remove the battery tray.

6. To install, reverse the removal procedure.