Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2011 >> Fusion FWD V6-3.5L >> Repair and Diagnosis >> Brakes and Traction Control >> Antilock Brakes / Traction Control Systems >> Wheel Speed Sensor >> Service and Repair >> Wheel Speed Sensor - Front
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Wheel Speed Sensor - Front




Wheel Speed Sensor - Front









Removal and Installation

1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Jacking and Lifting Service and Repair.

2. Remove the fender splash shield. For additional information, refer to Front End Body Panels Fender Splash Shield.

3. Disconnect the wheel speed sensor electrical connector.

4. Remove the wheel speed sensor harness bracket-to-body bolt.
- To install, tighten to 7 Nm (62 lb-in).

5. Detach the wheel speed sensor harness from the wheel knuckle bracket.

6. Remove the wheel speed sensor bolt and the wheel speed sensor.
- To install, tighten to 23 Nm (17 lb-ft).

7. To install, reverse the removal procedure.

pro multis · About Operation CHARM