B-Pillar Trim Panel - Regular Cab

B-Pillar Trim Panel - Regular Cab





Both B-pillar trim panels

1. Remove the door scuff plate trim panel.

1. Remove the screws.

2. Remove the scuff plate.





RH B-pillar trim panel

2. Remove the handle carrier cover.

3. Remove the jack handle carrier.

1. Remove the screws.

2. Remove the jack handle carrier.





LH B-pillar trim panel

4. Remove the package tray mat.

5. Remove the package tray.

1. Remove the screws.

2. Remove the package tray.





Both B-pillar trim panels

6. NOTE: If the safety belt guide cover is damaged or if it does not remain closed, install a new cover.

Remove the front safety belt guide cover.

- Release the tabs and remove the cover.





7. Remove the bolt and safety belt guide.
- Use the Safety Belt Bolt Bit to remove the bolt.
- To install, tighten to 40 Nm (30 lb-ft).

- Remove the safety belt guide.





8. Disconnect the safety belt anchor.

1. Use the Safety Belt Bolt Bit to remove the bolt.
- To install, tighten to 40 Nm (30 lb-ft).

2. Disconnect the safety belt anchor.





9. Reposition the B-pillar trim panel.

1. Remove the pin-type retainers.

2. Reposition the B-pillar trim panel.





10. Disconnect the radio speaker electrical connector.





11. Lower the rear of the A-pillar trim panel to remove the B-pillar trim panel.





12. Remove the B-pillar trim panel.

13. To install, reverse the removal procedure.