Seat Cushion - Front, 60 Percent

Seat Cushion - Front, 60 Percent

Disassembly and Assembly

NOTE: For parts identification and location, refer to Seat - Exploded View, Front Seat - Exploded View, Front.

1. Remove the seat cushion cover. For additional information, refer to Seat Cushion Cover - Front Seat Cushion Cover - Front.

2. Remove the wire harness.
- Disconnect the electrical connectors and detach the wire harness retainers.





3. Remove the seat track. For additional information, refer to Seat Track - 60 Percent Seat Track - 60 Percent.

4. Remove the 2 screws and seat position sensor.

5. Detach the pin-type retainer and remove the backrest latch release cable.
- Note the cable routing for correct installation.

6. Remove the seat cushion foam pad.

7. To install, reverse the disassembly procedure.