Do you have access to Mitchell1 Prodemand, or eautorepair.net DIY? If you are willing to share user/password (we can pay), please get in contact with us ASAP (truly, it is urgent): email operation-charm [[at]] tuta.io or click to submit anonymously
Connecting Rod, Engine
a No. 3 Journal - Supported by No. 1 and No. 5 Journals.
All dimensions are in mm unless noted.
Rod Bearing Cap
Install the connecting caps and bolts.
Tighten the bolts in 2 stages.
Stage 1: Tighten to 29 Nm (21 lb-ft).
Stage 2: Tighten an additional 90 degrees.