Procedures

Clutch Disc Check

1. NOTE: Install a new clutch disc if any of these conditions are present. Always install a new clutch pressure plate when installing a new clutch.

NOTE: For clutch discs that have oil or grease contamination, eliminate the source of the contamination.

NOTE: If the clutch disc springs are loose enough to rattle they will not cause noise when the vehicle is operating.

Inspect the clutch for the following:

- Oil or grease contamination

- Worn or loose facings

- Distortion

- Broken springs

- Burrs or uneven wear on the splines

- Wear or damage on the clutch disc surface