Seat Backrest - Front, Bucket and 40 Percent

Seat Backrest - Front, Bucket and 40 Percent

Disassembly

NOTE: For parts identification and location, refer to Seat - Exploded View, Front Seat - Exploded View, Front.

1. Remove the seat backrest assembly. For additional information, refer to Seat Backrest - Front, Bucket and 40 Percent Seat Backrest - Front, Bucket and 40 Percent.

2. Remove the seat backrest cover. For additional information, refer to Seat Backrest Cover - Front Seat Backrest Cover - Front.

3. Remove the backrest foam pad.

4. Detach and remove the side air bag wire harness.





Assembly

1. Route and attach the side air bag wire harness.

2. Install the backrest foam pad to the backrest frame.

3. Install the backrest cover. For additional information, refer to Seat Backrest Cover - Front Seat Backrest Cover - Front.

4. Install the seat backrest assembly. If a passenger seat has been serviced, do not prove out the Supplemental Restraint System (SRS) at this time. For additional information, refer to Seat Backrest - Front, Bucket and 40 Percent Seat Backrest - Front, Bucket and 40 Percent.

5. For passenger seat, carry out the Occupant Classification Sensor (OCS) System Reset. For additional information, refer to the General Procedures portion of Supplemental Restraint System Service and Repair.