Four Wheel Drive Selector Switch: Service and Repair

Mode Select Switch (MSS)













Removal and Installation

1. NOTICE: Before removing the audio unit, it must be placed in shipment mode. Failure to follow this instruction may result in damage to the audio unit.

Put the audio unit in shipment mode. For additional information, refer to Information and Entertainment Systems Audio Unit Shipment Mode.

2. Insert the Audio Unit Removing Tool, then remove and support the audio unit.





3. Disconnect the audio unit electrical connector(s) and antenna cable.

4. Remove the 2 instrument panel finish panel screws. Disengage the spring clips at the top. Remove the instrument panel finish panel.





5. Disconnect the finish panel electrical connectors.

6. Remove the Mode Select Switch (MSS) knob.





7. Turn the instrument panel finish panel over. Remove the 2 MSS screws.





8. Remove the MSS.

9. To install, reverse the removal procedure.