Rear Door: Service and Repair

Door - Rear Cargo









Removal and Installation

NOTICE: The following steps require the aid of an assistant. Failure to follow this instruction may result in damage to the vehicle.

1. Push the rear cargo door check arm release button to release it from the door and reposition the check arm.

2. Disconnect the rear cargo door electrical connector.

3. Support the rear cargo door.

4. Remove the rear cargo door upper hinge-to-door bolts.
- To install, tighten to 25 Nm (18 lb-ft).

5. Remove the rear cargo door lower hinge-to-door bolts.
- To install, tighten to 25 Nm (18 lb-ft).

6. Remove the rear cargo door.

7. To install, reverse the removal procedure.

8. Adjust as necessary. For additional information, refer to Door Alignment - Rear Adjustments.