Door Glass Top Run - Front

Door Glass Top Run - Front

Removal and Installation

1. Lower the front door glass to the fully DOWN position.

2. Remove the exterior mirror assembly. For additional information, refer to Rear View Mirrors Exterior Mirror.

3. Remove the exterior door window weatherstrip.
- Begin pulling up at rear edge of weatherstrip, and work along the remaining weatherstrip pulling straight up.





4. Remove the interior door trim panel. For additional information, refer to Interior Trim and Ornamentation Service and Repair.

5. Remove the interior door window weatherstrip.





6. Remove the watershield.

7. Remove the insulation pads.





8. Remove the quarter window glass division bar lower retaining screw.
- To install, tighten to 10 Nm (89 lb-in).





9. Remove the access plug and the quarter window glass division bar upper retaining screw.
- To install, tighten to 10 Nm (89 lb-in).





10. Position aside the top run weatherstrip channel.





11. Remove the top run and front door quarter glass assembly from the door opening.

1. Tip the top run and front door quarter glass rearward.

2. Slide the top run and front door quarter glass assembly upward.





12. To install, reverse the removal procedure.