Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay $250), please get in contact with us ASAP: email operation-charm [[at]] tuta.io or click to submit anonymously

Oil Pressure Sender: Service and Repair

Engine Oil Pressure (EOP) Switch

Removal and Installation

1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Jacking and Lifting Service and Repair.

2. Disconnect the Engine Oil Pressure (EOP) switch electrical connector.

3. Remove the EOP switch.
- To install, tighten to 15 Nm (133 lb-in).

4. NOTE: Apply thread sealant to the EOP switch threads.

To install, reverse the removal procedure.