Air Cleaner Outlet Pipe

Air Cleaner Outlet Pipe

1. Disconnect the crankcase ventilation tube-to-Air Cleaner (ACL) outlet pipe quick connect coupling. For additional information, refer to Fuel System - General Information Service and Repair.

2. Loosen the clamp and disconnect the power brake booster aspirator tube-to-ACL outlet tube.
- To install, tighten to 3 Nm (27 lb-in).

3. Loosen the clamp and disconnect the ACL outlet pipe from the ACL cover.
- To install, tighten to 3 Nm (27 lb-in).

4. Loosen the clamp and disconnect the ACL outlet pipe from the Throttle Body (TB).
- To install, tighten to 3 Nm (27 lb-in).

5. NOTE: The ACL outlet pipe should be securely sealed to prevent unmetered air from entering the engine.

To install, reverse the removal procedure.