Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay $250), please get in contact with us ASAP: email operation-charm [[at]] tuta.io or click to submit anonymously. (This is the last day we'll be asking)
Brake Light Switch: Service and Repair
Stoplamp Switch
Removal and Installation
NOTICE: Do not press the brake pedal when installing or removing the stoplamp switch or damage to the stoplamp switch may occur.
1. Disconnect the stoplamp switch electrical connector.
2. Rotate the stoplamp switch clockwise 45 degrees and remove the stoplamp switch.
3. NOTE: The stoplamp switch is self-adjusting. Do not press the brake pedal during installation. Initial installation of the stoplamp switch allows for one adjustment only. If additional adjustments are necessary, install a new stoplamp switch.
To install, reverse the removal procedure.