Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay $250), please get in contact with us ASAP: email operation-charm [[at]] tuta.io or click to submit anonymously
Outer Constant Velocity (CV) Joint Boot
Outer Constant Velocity (CV) Joint Boot
Removal
1. Remove the inner CV boot. For additional information, refer to Inner Constant Velocity (CV) Joint Boot Inner Constant Velocity (CV) Joint Boot.
2. NOTICE: Use a vise with protective jaw covers or damage to the halfshaft may occur.
Remove the outer CV joint boot.
- Cut, remove and discard the boot clamps.
- Pull the boot inward over the halfshaft.
Installation
1. Apply grease (125 g [4.40 oz] provided with the boot kit) into the CV joint and boot.
2. NOTICE: Use care not to damage the boot or component damage may occur.
Install the outer CV joint boot.
- Slide the outer boot outward over the CV joint.
- Press the boot into the annular groove on the CV joint.
- Slide a small screwdriver under the boot seat to allow the air to escape.
- Locate the boot in position and remove the screwdriver.
3. Using the Constant Velocity Joint Boot Clamp Installer, install the new boot clamps.
4. Install the inner CV boot. For additional information, refer to Inner Constant Velocity (CV) Joint Boot Inner Constant Velocity (CV) Joint Boot.