Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2012 >> E 350 V10-6.8L >> Repair and Diagnosis >> Powertrain Management >> Ignition System >> Camshaft Position Sensor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Camshaft Position Sensor: Service and Repair




Camshaft Position (CMP) Sensor





NOTE: 4.6L shown, 5.4L and 6.8L similar.









Removal and Installation

1. Remove the Air Cleaner (ACL) and ACL (Air Cleaner) outlet pipe.

2. Disconnect the Camshaft Position (CMP) sensor electrical connector.

3. Remove the bolt and the CMP (Camshaft Position) sensor. Inspect the O-ring seal for damage and install new if necessary.
- Lubricate the O-ring seal and with clean engine oil prior to installation.

- To install, tighten to 10 Nm (89 lb-in).


4. To install, reverse the removal procedure.
pro multis · About Operation CHARM