Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2012 >> E 350 V10-6.8L >> Repair and Diagnosis >> Starting and Charging >> Starting System >> Ignition Switch >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Ignition Switch: Service and Repair




Ignition Switch









Removal and Installation

1. Depower the Supplemental Restraint System (SRS). For additional information, refer to Restraints and Safety Systems &/or Air Bag Systems.

2. Remove the steering column opening cover and the instrument panel LH knee bolster.

3. Disconnect the ignition switch electrical connector.

4. Remove the 2 ignition switch screws and the ignition switch.
- To install, align the ignition switch with the slot and index mark on the steering column and tighten the screws to 6 Nm (53 lb-in).


5. To install, reverse the removal procedure.

6. Repower the SRS (Supplemental Restraint System). For additional information, refer to Restraints and Safety Systems &/or Air Bag Systems.
pro multis · About Operation CHARM