Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2012 >> E 350 V10-6.8L >> Repair and Diagnosis >> Wiper and Washer Systems >> Windshield Washer Pump >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Windshield Washer Pump: Service and Repair




Washer Pump and Reservoir

Removal

1. Remove the battery tray.

2. Remove the windshield wiper reservoir nut and bolt.
- To install, tighten to 4 Nm (35 lb-in).


3. Disconnect the filler hose from the reservoir.

4. Disconnect the washer pump electrical connector and wiring harness locator.

5. WARNING: Carefully read cautionary information on product label. For EMERGENCY MEDICAL INFORMATION seek medical advice. In the USA or Canada on Ford/Motorcraft products call: 1-800-959-3673. For additional information, consult the product Material Safety Data Sheet (MSDS) if available. Failure to follow these instructions may result in serious personal injury.

NOTE: If necessary, drain the windshield washer reservoir after removal.

Disconnect the windshield washer hose and remove the washer pump and reservoir.


6. NOTICE: Do not operate the windshield washer pump before filling the windshield washer reservoir. Failure to do so could result in premature pump failure.

To install, reverse the removal procedure.

pro multis · About Operation CHARM