Pinpoint Test B : The Shift Control Is Out of Correct Gear Relationship

External Controls

Pinpoint Tests

NOTE: Refer to all TSBs and On-Line Automotive Service Information System (OASIS) messages that pertain to the transmission concern and follow the procedure as described.

PINPOINT TEST B : THE SHIFT CONTROL IS OUT OF CORRECT GEAR RELATIONSHIP

B1 CHECK THE SELECTOR LEVER LINKAGE

- Ignition ON.

- Apply the brake pedal.

- Gain access to the shift control linkage.

- Position the selector lever in all ranges.

- Observe all linkages during operation.

Is the linkage damaged?

Yes
INSTALL a new selector lever linkage. TEST the system for normal operation.

No
GO to B2.

B2 CHECK THE SELECTOR LEVER CABLE

- Check selector lever cable and bracket installation and tightness.

Is the selector lever cable correctly installed and adjusted?

Yes
VERIFY the selector lever cable adjustment. REFER to Selector Lever Cable Adjustment Adjustments. ADJUST the selector lever cable if necessary. GO to B3.

No
REPAIR as necessary. TEST the system for normal operation.

B3 CHECK THE LINKAGE/CABLE FOR THE CORRECT GEAR RELATIONSHIP

- Apply the brake pedal.

- Position the selector lever in all ranges.

Does the indicator match the gear selection?

Yes
System OK. TEST the system for normal operation.

No
REFER to Instrument Panel, Gauges and Warning Indicators.