Turbine Shaft Speed (TSS) Sensor

Turbine Shaft Speed (TSS) Sensor









Removal and Installation

1. With the vehicle in NEUTRAL, position it on a hoist.

2. Disconnect the Turbine Shaft Speed (TSS) sensor electrical connector.

3. Remove the TSS (Turbine Shaft Speed) sensor bolt and sensor.
- Remove the TSS (Turbine Shaft Speed) sensor bolt.

- Remove the TSS (Turbine Shaft Speed) sensor.


4. To install, reverse the removal procedure.
- Tighten bolt to 11 Nm (97 lb-in).