Front Suspension

Wheel Bearing and Wheel Hub













Removal

NOTE: If removing the wheel hub, the wheel bearing must be replaced.

1. Remove the wheel knuckle. For additional information, refer to Wheel Knuckle .

2. Using the Step Plate and a suitable press, remove the wheel hub from the wheel bearing.





3. NOTE: This step may not be necessary if the inner wheel bearing race remains in the wheel knuckle after removing the wheel hub.
Using the Pinion Bearing Cone Remover and a suitable press, remove the inner wheel bearing race from the wheel hub.






4. Remove the snap ring.

5. Using the Wheel Hub Cup Remover/Installer and a suitable press, remove the outer wheel bearing race from the wheel knuckle.





Installation

1. Using the Wheel Hub Bearing Cup Installer and a suitable press, install the wheel bearing into the wheel knuckle.





2. Install the snap ring.

3. Using the Wheel Hub Bearing Cup Installer, Step Plate and a suitable press, install the wheel hub into the wheel bearing.





4. Install the wheel knuckle. For additional information, refer to Wheel Knuckle .